ASTM A515 A516 Gr60/Gr65/Gr70 Carbon Steel Plate Sheet

• Customization: Available
• After-sales Service: Provide
• Warranty: Provide
• Model NO.: Carbon steel plate/sheet
• Type: Steel Plate
• Standard: ASTM, AISI, GB, GOST, EN
• Surface Treatment: Acc. to customer′s Requirements.
• Technique: Hot Rolled
• Application: Ship Plate, Boiler Plate, Flange Plate, Vessle Plate, Pressure Vessel Plate
• Transport Package: Wooden and Acc. to Customer′s Requirements.
• Specification: width: 4800mm, thickness: 500mm, length: 25m
• Origin: China

Product Description

Product Description

 

Steel Plate/Sheet
Product Series	Plate--material 5.00 mm and over in thickness and over 250 mm in width. Sheet--material under 5.00 mm in thickness and 600 mm and over in width. Strip--cold-rolled material under 5.00 mm in thickness and under 600 mm in width.
Specification	maximum width: 4800mm maximum thickness: 500mm maximum length: 25m
Material	Carbon steel Material grade table see is shown below. (For else material, please refer to the corresponding browsing page.)
Standard	ASTM A20(Carbon) ASTM A480(Stainless Steel) EN 10028-1 EN 10028-2 EN 10028-3
Package	According  to  customers'   requirement
Delivery	within 20 working days since we get the deposit, mainly according to your quantity and the ways of transportation.
Payment	T/T
Shipment	FOB/CIF/CFR
Ordering Information	We shall take the following two factors into consideration when selecting steel, the one is the machinability of the steel, the other is the service character During the processing, we hope the steel has a low strength and high elongation, which make it easy to cut, stamp or form. But in the service of steel, we hope it has high strength, good impact performance to suffer extreme service condition. For these two reasons, we should select suitable steel from its mechanical properties Name or Form (plate, sheet, or strip) Dimensions (thickness, width, length) Name of material (stainless steel) Specification designation Quantity Condition(hot-rolled, cold-rolled, annealed, heat-treated) If there are special requirements for finish, please specify.In the case of polished finishes,specify whether one or both sides are to be polished,Edge, strip only.
Application	Steel plates are widely used in various industries, such as marine, automobile, bridge, construction, machinery and pressure vessels.

Material Grade

 

Carbon Steels
Standard Designation	Grade, Class, Type, Symbol	Steel Number	UNS Number	Section Thickness t, mm	C	Mn	Si	P	S	Cr	Ni	Mo	Others
EN10028-2	P235GH	1.0345	---	---	0.16	0.60-1.20	0.35	0.025	0.015	0.30	0.30	0.08	Cu 0.30; Nb 0.020; Ti 0.03; V 0.02; Al ≥ 0.020; N 0.012; Cr+Cu+Mo+Ni 0.70
EN10028-3	P275NH	1.0487	---	---	0.16	0.80-1.50	0.40	0.025	0.015	0.30	0.30	0.08	Cu 0.30; Nb 0.05; Ti 0.03; V 0.05; N 0.012; Al ≥ 0.020; Nb+Ti+V 0.05; Cr+Cu+Mo0.45
EN10028-2	P265GH	1.0425	---	---	0.20	0.80-1.40	0.40	0.025	0.015	0.30	0.30	0.08	Cu 0.30; Nb 0.020; Ti 0.03; V 0.02; Al ≥ 0.020; N 0.012; Cr+Cu+Mo+Ni 0.70
ASTM A515/A515M	60 [415]	---	K02401	≤ 25	0.24	0.90	0.15-0.40	0.035	0.035	---	---	---	---
				25 < t ≤ 50	0.27
				50 < t ≤ 100	0.29
				100 < t ≤ 200	0.31
				> 200	0.31
ASTM A516/A516M	60 [415]	---	K02100	≤ 12.5	0.21	0.60-0.90	0.15-0.40	0.035	0.035	---	---	---	---
				12.5 < t ≤ 50	0.23	0.85-1.20
				50 < t ≤ 100	0.25
				100 < t ≤ 200	0.27
				> 200	0.27
ASTM A515/A515M	65 [450]	---	K02800	≤ 25	0.28	0.90	0.15-0.40	0.035	0.035	---	---	---	---
				25 < t ≤ 50	0.31
				50 < t ≤ 100	0.33
				100 < t ≤ 200	0.33
				> 200	0.33
ASTM A516/A516M	65 [450]	---	K02403	≤ 12.5	0.24	0.85-1.20	0.15-0.40	0.035	0.035	---	---	---	---
				12.5 < t ≤ 50	0.26
				50 < t ≤ 100	0.28
				100 < t ≤ 200	0.29
				> 200	0.29
EN10028-2	P295GH	1.0481	---	---	0.08-0.20	0.90-1.50	0.40	0.025	0.015	0.30	0.30	0.08	Cu 0.30; Nb 0.020; Ti 0.03; V 0.02; Al ≥ 0.020; N 0.012; Cr+Cu+Mo+Ni 0.70
ASTM A515/A515M	70 [485]	---	K03101	≤ 25	0.31	1.20	0.15-0.40	0.035	0.035	---	---	---	---
				25 < t ≤ 50	0.33
				50 < t ≤ 100	0.35
				100 < t ≤ 200	0.35
				> 200	0.35
ASTM A516/A516M	70 [485]	---	K02700	≤ 12.5	0.27	0.85-1.20	0.15-0.40	0.035	0.035	---	---	---	---
				12.5 < t ≤ 50	0.28
				50 < t ≤ 100	0.30
				100 < t ≤ 200	0.31
				> 200	0.31
ASTM A537/A537M	1	---	K12437	≤ 40	0.24	0.70-1.35	0.15-0.50	0.035	0.035	0.25	0.25	0.08	Cu 0.35
				> 40		1.00-1.60
ASTM A737/A737M	B	---	K12001	---	0.20	1.15-1.50	0.15-0.50	0.035	0.030	---	---	---	Cb 0.05
EN10028-3	P355N P355NH	1.0562 1.0565	---	---	0.18	1.10-1.70	0.5	0.025	0.010	0.30	0.50	0.08	Al 0.020; N 0.012; Cu 0.30; Ti 0.03; V 0.10 Nb+Ti+V 0.12
EN10028-2	P355GH	1.0473	---	---	0.10-0.22	1.10-1.70	0.60	0.025	0.015	0.30	0.30	0.08	Cu 0.30; Nb 0.020; Ti 0.03; V 0.02; Al ≥ 0.020; N 0.012; Cr+Cu+Mo+Ni 0.70
ASTM A738/A738M	A	---	K12447	≤ 65	0.24	1.50	0.15-0.50	0.035	0.035	0.25	0.50	0.08	Cu 0.35; V 0.07; Cb 0.04;  Cb+V 0.08
				> 65	0.24	1.60	0.15-0.50	0.035	0.035	0.25	0.50	0.08	Cu 0.35; V 0.07; Cb 0.04; Cb+V 0.08
ASTM A537/A537M	2	---	K12437	≤ 40	0.24	0.70-1.35	0.15-0.50	0.035	0.035	0.25	0.25	0.08	Cu 0.35
				> 40		1.00-1.60
ASTM A537/A537M	3	---	K12437	≤ 40	0.24	0.70-1.35	0.15-0.50	0.035	0.035	0.25	0.25	0.08	Cu 0.35
				> 40		1.00-1.60
ASTM A737/A737M	C	---	K12202	---	0.22	1.15-1.50	0.10-0.55	0.035	0.030	---	---	---	V 0.04-0.11; N 0.03
ASTM A738/A738M	C	---	---	≤ 65	0.20	1.50	0.15-0.50	0.025	0.025	0.25	0.50	0.08	Cu 0.35; V 0.05
				> 65		1.60
ASTM A612/A612M	---	---	K02900	---	0.25	1.00-1.50	0.15-0.50	0.035	0.025	0.25	0.25	0.08	Cu 0.35; V 0.08
ASTM A738/A738M	B	---	K12001	≤ 40	0.20	0.90-1.50	0.15-0.55	0.030	0.030	0.30	0.60	0.20	Cu 0.35; V 0.07; Cb 0.04; Cb+V 0.08
				40 ≤ t ≤ 65		0.90-1.50						0.30
				> 65		0.90-1.60						0.30

Carbon Steels
Standard Designation	Grade, Class, Type, Symbol or Name	Steel Number	UNS Number	Section Thickness t, mm	Yield Strength, min N/mm2 or MPa	Tensile Strength, min N/mm2 or MPa	Elongation, min, %
EN10028-2	P235GH	1.0345	---	≤ 16	235	360-480	24
				16 < t ≤ 40	225
				40 < t ≤ 60	215
				60 < t ≤ 100	200
				100 < t ≤ 150	185	350-480
				150 < t ≤ 250	170	340-480
EN10028-3	P275NH	1.0487	---	≤ 16	275	390-510	24
				16 < t ≤ 40	265
				40 < t ≤ 60	255
				60 < t ≤ 100	235	370-490	23
				100 < t ≤ 150	225	360-480
				150 < t ≤ 250	215	350-470
EN10028-2	P265GH	1.0425	---	≤ 16	265	410-530	22
				16 < t ≤ 40	255
				40 < t ≤ 60	245
				60 < t ≤ 100	215
				100 < t ≤ 150	200	400-530
				150 < t ≤ 250	185	390-530
ASTM A515/A515M	60 [415]	---	K02401	---	220	415-550	25
ASTM A516/A516M	60 [415]	---	K02100	---	220	415-550	25
ASTM A515/A515M	65 [450]	---	K02800	---	240	450-585	23
ASTM A516/A516M	65 [450]	---	K02403	---	240	450-585	23
EN10028-2	P295GH	1.0481	---	≤ 16	295	460-580	21
				16 < t ≤ 40	290
				40 < t ≤ 60	285
				60 < t ≤ 100	260
				100 < t ≤ 150	235	440-570
				150 < t ≤ 250	220	430-570
ASTM A515/A515M	70 [485]	---	K03101	---	260	485-620	21
ASTM A516/A516M	70 [485]	---	K02700	---	260	485-620	21
ASTM A537/A537M	1	---	K12437	≤ 65	345	485-620	22
				65 < t ≤ 100	310	450-585
ASTM A737/A737M	B	---	K12001	---	345	485-620	23
EN10028-3	P355N P355NH	1.0562 1.0565	---	≤ 16	355	490-630	22
				16 < t ≤ 40	345
				40 < t ≤ 60	335
				60 < t ≤ 100	315	470-610	21
				100 < t ≤ 150	305	460-600
				150 < t ≤ 250	295	450-590
EN10028-2	P355GH	1.0473	---	≤ 16	355	510-650	20
				16 < t ≤ 40	345
				40 < t ≤ 60	335
				60 < t ≤ 100	315	490-630
				100 < t ≤ 150	295	480-630
				150 < t ≤ 250	280	470-630
ASTM A738/A738M	A	---	K12447	---	310	515-655	20
ASTM A537/A537M	2	---	K12437	≤ 65	415	550-690	22
				65 < t ≤ 100	380	515-655
				100 < t ≤ 150	315	485-620	20
ASTM A537/A537M	3	---	K12437	≤ 65	380	550-690	22
				65 < t ≤ 100	345	515-655
				100 < t ≤ 150	275	485-620	20
ASTM A737/A737M	C	---	K12202		415	550-690	23
ASTM A738/A738M	C	---	---	≤ 65	415	550-690	22
				65 < t ≤ 100	380	515-655	22
				> 100	315	485-620	20
ASTM A612/A612M	---	---	K02900	6 < t ≤ 50	410	550-670	22
				50 < t ≤ 100	390
				100 < t ≤ 150	370
ASTM A738/A738M	B	---	K12001	---	415	585-705	20

Product Photo